How to start a fireplace?

The fire was with a man throughout his history, isn’t it? So today, there are not so many people who will refuse to pamper before a cosy crackling fireplace. But how to behave if it turns out on not so attractive place at home? On the contrary, it is the cause of permanent nerves for the owners. Probably, the reason is in the wrong utilizing. Answers to the question about how to start a fire in a fireplace will conclude many issues.

What ought you to pay attention to in case of firing?

1. Logs

The open fire is the main attraction, so it’s indispensable to treat the option of fuel for it with all significance. It is best for this the solid wood, such as oak, hornbeam, chestnut or beech. They are suitable. They have excellent healing qualities.

Of course, for beginning, you can use only carefully dried logs, so it is better to take care in advance about their purchase. Store them in a specially designated closed room or on the street, in a wrapped form.

1. Funnel

Tidy funnels are the bases. With every kind of ignition the soot will preserve, and if it is not cleaned, there may be a fire.

1. Let’s fire in fireplace

It’s not awkward to begin that. But if the abilities are not enough, then it is not superfluous to listen to the useful tips.

A few prosperous steps

1. Be persuaded if the room doesn’t have drafts where it is located. To do this, check whether the door and windows are closed.

2. Open the fast on the funnel to the end (otherwise all the fume will go inside the room) and completely close the holes for unchoking.

3. Look at the ashtray: if it is vacuous. When building a fire in fireplace, it’s requisite to clean the ash (not completely and in a tempered condition). If you don’t like this to do, you won’t be able to achieve the desired result and the ignition will take you a lot of time that you can spend for nothing.

4. Start laying the firewood. In the furnace, a distance slightly less than the longitude of firewood put two split in the half wood. There are 2 more, but already perpendicular. We continue to lay six or eight firewood, until a well formed in the middle.

   

5. Lay the paper in the middle of the well.

6. Light up! Before the fast will be opened, light up the newspaper; preserve it in the vertex of the combustion area at the funnel. The hot air will push the cold air out.

7. Sure thing! Now you know how to light fireplace. Promptly after the fire “clutch”, leave the everything clothed. This will increase the traction from below and will not allow sparks to enter the room.

People who were in the cold weather at home without heating know that there’re many various ways to spark the fire. But there is the inquisitive labour by which the sparking becomes light and, in addition, the best for the environment.

Experts often talk about flushing from top to bottom or on the contrary. This is the best way to start a fire in fireplace and gives less ash, provides good access to oxygen and leads to the fact that the first portion of fuel burns longer.