How To Make Window Screens

<p><strong>The necessary materials:</strong></p> <ul><li>Cable-channel (15*10 mm) - 4 pcs;</li><li>Metal angle - 4 pcs;</li><li>Exhaust rivet (4,0*6) - 16 pcs;</li><li>Glue;</li><li>Mosquito net (1*2 m);</li><li>Sandpaper;</li><li>Plastic angle.</li></ul> <figure><a class="images-link" data-lightbox="gallery" href="https://abbigli.com/thumbs/7lwSdfHmT3VKS63vOpsv0EjpLno=/d987a8e67604453088aa9d82e3dfcf6e"><img src="https://abbigli.com/thumbs/unsafe/fit-in/1000x0/https://abbigli.com/thumbs/7lwSdfHmT3VKS63vOpsv0EjpLno=/d987a8e67604453088aa9d82e3dfcf6e" data-image="31441"></a></figure> <h2>The Sequence Of Works</h2> <p>1. Measure the window, saw off by a metal saw a cable-channel under the angle 45* according to the size and grind the place of sawing off with a sandpaper.</p> <p>2. Connect the blanks of the frame and insert in its corners the metal angles, and then drill in the cable-channel the holes for rivets.</p> <figure><a class="images-link" data-lightbox="gallery" href="https://abbigli.com/thumbs/3f1f4yuw5fOBoBb-6haAbBOquK8=/f5211950d18349b7b78db955fa29567b"><img src="https://abbigli.com/thumbs/unsafe/fit-in/1000x0/https://abbigli.com/thumbs/3f1f4yuw5fOBoBb-6haAbBOquK8=/f5211950d18349b7b78db955fa29567b" data-image="31442"></a></figure> <p>3. Fasten the angles to cable-channel by a rivet. Be careful! The riveter must be on the side of the cable-channel otherwise the cable-channel will break while riveting.</p> <figure><a class="images-link" data-lightbox="gallery" href="https://abbigli.com/thumbs/SfLMD_SeQcymp9SqTPjp8p2Z2Wc=/405b99d6923e47999270f8df07b701dc"><img src="https://abbigli.com/thumbs/unsafe/fit-in/1000x0/https://abbigli.com/thumbs/SfLMD_SeQcymp9SqTPjp8p2Z2Wc=/405b99d6923e47999270f8df07b701dc" data-image="31443"></a></figure> <figure><a class="images-link" data-lightbox="gallery" href="https://abbigli.com/thumbs/jN0GmrnTVuUheP8iYFjyCktnwEo=/7385f6057fb04d0090360ae1fadda0c3"><img src="https://abbigli.com/thumbs/unsafe/fit-in/1000x0/https://abbigli.com/thumbs/jN0GmrnTVuUheP8iYFjyCktnwEo=/7385f6057fb04d0090360ae1fadda0c3" data-image="31444"></a></figure> <p>As a result we will get such a construction:</p> <figure><a class="images-link" data-lightbox="gallery" href="https://abbigli.com/thumbs/DW3f-5Pj8hY1Nj8qOu0_K9jO7Ds=/f6654e5f40d4447aa0a5b6556d828cb4"><img src="https://abbigli.com/thumbs/unsafe/fit-in/1000x0/https://abbigli.com/thumbs/DW3f-5Pj8hY1Nj8qOu0_K9jO7Ds=/f6654e5f40d4447aa0a5b6556d828cb4" data-image="31445"></a></figure> <p>4. There comes the most crucial and difficult moment, we need to tighten the net on the frame. Put a mosquito net on the frame so that on each side of the frame there should be a margin of 2 cm., and with the help of a second person we begin to stretch and snap the net (long side-short-long) by the upper part of cable-channel (it is important to eliminate all of the slacks, but do not drag the net - on this will depend its view of the window). Then cut off the excess net by a blade and individually glue the parts of the cable-channel around the perimeter of the frame, so that during the usage the cable-channel does not break down on its own.</p> <p>Here’s what’s come up:</p> <figure><a class="images-link" data-lightbox="gallery" href="https://abbigli.com/thumbs/JRB-V2o4Jj8r2thCDRLU9Xk8sLM=/c2dcf47e31994c268756201fbf26887f"><img src="https://abbigli.com/thumbs/unsafe/fit-in/1000x0/https://abbigli.com/thumbs/JRB-V2o4Jj8r2thCDRLU9Xk8sLM=/c2dcf47e31994c268756201fbf26887f" data-image="31446"></a></figure> <p>Mosquito net is ready, it remains to mount and fasten it on the window.</p>